The HID EdgeReader Solo IP Access Solution puts control and user interface at the door -- right inside the reader. The EdgeReader Solo ESRP40 will offer a cost-effective, stand-alone, single-door IP access control solution. This easy-to-use solution enables remote management and report generation via standard web browser. User information, administration, door configuration and retrieval of events are done through a user-friendly, instructional web environment. Bringing "Intelligence to the Door", the flexible EdgeReader Solo ESRP40 includes an integrated multiCLASS reader. And the EdgeReader Solo ESRP40 IP Access Solution can be converted from stand-alone operation to a system reader for a host environment quickly and easily through the web browser. There is never a need to go to the door.

• Simplicity - Control functions for a single door and HID iCLASS reader in one device with the same footprint as a traditional reader
• Management - Remotely managed over the network via standard web browser
• Real Cost Savings - Network access is CAT-5 for communications and Power over Ethernet (PoE). Eliminates the need for separate power supplies Established Open Architecture - Built on the HID OPIN™ platform, can be remotely reconfigured to a system reader in a host environment

• Embedded User Interface, no external software requirement
• Remotely managed via standard web browser
• Works within DHCP or Static IP networks for plug and play installation
• "Door Dashboard" accesses door commands, status, alarms, and recent events from all screens
• Back-up and restore of data from user PC
• Built-in diagnostics
• Installer "calling card" allows inclusion of contact information for user support
• User upgradable firmware
• Built-in help screens
• Manages 1000 cardholders/credentials
• Manages 8 schedules and 3 intervals each day of the week including holidays
• View last 5000 events
• Standardized report generation, including CSV export
• Built-in 802.3af Power over Ethernet (PoE), with 600 mA available for external field devices and locking hardware
• Easily migrates to a host based system - (OEM OR CS)
  After upgrade:
  • 40,000 credentials
  • 65000 Schedules
  • Full Edge/VertX® capacities
• Wet or Dry door relays
• Permits local laptop computer connections for diagnostics and configuration

Specifications

Dimensions 3.3" W x 4.8" H x 2.3" D (83.8 mm x 121.9 mm x 57.9 mm)

Weight 14.7 oz (.400 kg)

Card Data Formats Supports any card data format up to 128 bits

Hardware 32-bit RISC CPU, 100 MHz processor

Memory 8 MB onboard Flash memory; 32 MB SDRAM; 256K SRAM

Visual Indicators Two LEDs indicate power/network activity and device I/O activity.

Power Supply Requirements 1 A @ 12-16 VDC maximum

Relays can be configured to supply power as follows: Available Power : The EdgeReader is capable of supplying a total of 600 mA to field devices.Unpowered, relay contacts are rated for 2 A @ 30 VDC

The EdgeReader is intended for use in indoor environments that comply with the following specifications:

Operating Temperature 32° to 122° F (0° to 50° C) Operating Humidity 5% to 95% relative, non-condensing Communication Ports Ethernet – 10 or 100 Mbps

Certifications UL 294 and UL 1076 Listed Component for the US pending, CSA 205 for Canada, FCC Class B Verification (FCC Class A Verification for reader portion only.) EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan

Warranty Warrantied against defects in materials and workmanship for 18 months (See complete warranty policy for details).